For sale: a 2008 PMP Chassis with a Seros built Yamaha R6.
Car: The frame is straight, has never been hit hard. Only has one ding in the lower frame rail. Double top wing posts. Shifter moved closer to the seat. Full Carbon Fiber body and full length aluminum floor pan. Weld 3 spoke spindles. Custom pedals. Disk brake tank shield. Joes chain roller. Radiator grill, to run without nose. ARS Left rear rebound adj. QA1 Shocks on the other 3 corners.
Engine: 2005 Yamaha R6 built by Seros with 7 races from a rebuild. Don't remember the exact specs, but have all the receipts. This engine has never been blown up. 3 speed transmission, Cams, no charging system, custom wiring harness with a fan, hot box, Seros carbs and Holley fuel system.
Other: New chain, wing slider, rear brake bias valve and battery charger with a quick connect. Car has new bearings and bolts all the way around 7 races ago.
Have a ton of parts, gears, cold weather (high density) carbs, race ready wiring harness and 2 ecu's, complete front axle, bare rear axle with slight bend but has been run as spare. Short Block that needs a rebuild and a few sets of injection. Spare set of wheels, extra shocks, complete set of wings, front wing posts swept and straight, torsion stops, torsion arms, tons of odds and ends.
Pitcart: Custom pitcart with 150cc engine. Comes with everything in the pictures. Has tool box, air compressor, jack, tire rack, standing platform, lights (front and back) electrical plumbed front and back, aerosol rack, spare part rack, wheel wrench. Its no speed demon but never will get stuck when it is muddy at the track.
Car has a fast time from 2013 season and 5th place at clay cup. Multiple fast times. Need to get rid of the car its just sitting in the garage and collecting dust. I want to see it back on the track. Car is 100% the same way as parked after clay cup. Car is complete minus seat. Only thing that I would say it needs is a new set of belts, the ones that are in it are past the service date.
For sale: a 2008 PMP Chassis with a Seros built Yamaha R6.
Car: The frame is straight, has never been hit hard. Only has one ding in the lower frame rail. Double top wing posts. Shifter moved closer to the seat. Full Carbon Fiber body and full length aluminum floor pan. Weld 3 spoke spindles. Custom pedals. Disk brake tank shield. Joes chain roller. Radiator grill, to run without nose. ARS Left rear rebound adj. QA1 Shocks on the other 3 corners.
Engine: 2005 Yamaha R6 built by Seros with 7 races from a rebuild. Don't remember the exact specs, but have all the receipts. This engine has never been blown up. 3 speed transmission, Cams, no charging system, custom wiring harness with a fan, hot box, Seros carbs and Holley fuel system.
Other: New chain, wing slider, rear brake bias valve and battery charger with a quick connect. Car has new bearings and bolts all the way around 7 races ago.
Have a ton of parts, gears, cold weather (high density) carbs, race ready wiring harness and 2 ecu's, complete front axle, bare rear axle with slight bend but has been run as spare. Short Block that needs a rebuild and a few sets of injection. Spare set of wheels, extra shocks, complete set of wings, front wing posts swept and straight, torsion stops, torsion arms, tons of odds and ends.
Pitcart: Custom pitcart with 150cc engine. Comes with everything in the pictures. Has tool box, air compressor, jack, tire rack, standing platform, lights (front and back) electrical plumbed front and back, aerosol rack, spare part rack, wheel wrench. Its no speed demon but never will get stuck when it is muddy at the track.
Car has a fast time from 2013 season and 5th place at clay cup. Multiple fast times. Need to get rid of the car its just sitting in the garage and collecting dust. I want to see it back on the track. Car is 100% the same way as parked after clay cup. Car is complete minus seat. Only thing that I would say it needs is a new set of belts, the ones that are in it are past the service date.
Price Reduced - $12,000 takes everything.
Noel (206) 930-0765